Talos Mk. 2 'The Hunt'

Name: Talos Suit MK III
Type: Item -Armor- [Specialization]
Quality: Sealed [Tier IV]
Coverage: Full-body
Condition: Good [+7]
Description: The Talos suit is a frame work, designed so that it can cover the body in micro hydraulics and electronic/reiatsu servos that boost the bodies capacity to lift and strike. The armor itself is the frame mounted with armor plating held in place with small hydraulics so that they are not 'hard' mounted. This allows for more maneuverability but it comes at the cost of speed, granting the wearer not actual speed boost to motion. This suit is not equipped with any additional defenses to speak of save for the layer of metal that makes up its skin. Actually the only protection this suit provides is in the face that it is a layer of metal separating the wearer from the attacker. The suit itself provides little protection from piercing weapons if directed at weak points in the armor with enough accuracy but can be used to stop broad slashing cuts at the frame that protects the worst impact points. The suit itself is powered by a single emerald green Full-bringers Sentience gem that has been cut so that it is in two diamond shaped rings. This 'power cell' is mounted on the back of the neck, just in between the shoulder blades. The rings put off little energy when exposed to reiatsu but the energy output increases exponentially when the ambient energy is reduced to nothing meaning the energy output it increased with the drain. Around the gems are a collection of photo-voltic plates, thermo-electric plates and a insulating layer of Reiatsu absorbing mineral collected from the spiritual world. When the gems are at full out put they are putting enough energy to catch 12 tons but this will drain the gems exceptionally quickly where they will have to be returned to a charging station. Downloaded into the system is Gage's own A.I. LNI [Lani] to perform on the fly battle calculations and situation predictions. 'Her' processor is actually a small pack, mounted to the Skeleton in two pieces on the shoulder blades. These processors would normally draw massive amounts of energy as they run the super computer based AI Lani but instead due to the photonics in the system they instead draw on 1/15th of the normally required energy. LNI performs many functions in this system including Weapon Targeting, accuracy predictions, range and environmental adjustments. Included in this system is a self monitoring program that keeps all life readouts, biological information, video recordings and any other data that is collected saved on physical hard drives that automatically upload them to a private web server anytime that connection to the internet is made. Also mounted to the exoskeleton are small jets, powered by light producing diodes that have a series of magnification lenses, condensing that light into a single pinpoint location with enough intensity to produce a flame. While not in itself being useful Gage is able to funnel large amounts of energy into these diodes transforming these small flames into full sized jets capable of acting in bursts or in long duration burns.

Materials: The frame of this suit is made of Harmonized Steel [Tier IV], worked and milled in such a way that it has the same resilience and hardness as a Shikai level weapon. The wiring in this suit is made of harmonized copper as are the light emitting diodes [IV]. The power source of this suit is a collection of materials bought from a professional electrical company with a rare component found in Soul Society in the form of Reiatsu Absorbing Minerals and finally a single Soul Sentience Gem cut to fit into the batteries shell [Extraordinary].

Construction: Around each major joint a pair of metal rings are bolted together with the hydrolic pistons allowing for the full range of motion normally given to a body part. However around some of the smaller joints there is a loss in mobility due to the scale of the parts that are involved. Along the framework thin metal piping runs, the interior of these pips filled with insulated wiring so that on the chance that there is damage the wiring is at least slightly protected. Even with the large amount of coverage that the exoskeleton provides it still leaves over 50 percent of the body exposed to open air except for the head. The entirety of the head is covered with the helmet with a layer of bullet proof shatter resistant glass for the HUD and a layer of black metal over that.

Drawbacks: This armor has not been made airtight, is susceptible to piercing damage more than any other, provides no reasonable defense against electrical attacks. Also due to the layer of metal that has been spiritually enhanced the user undergoes a -1 advantage penalty to any Soul Communication techniques that do not directly use the suit as a means of execution.[More drawback may be added without consulting the Tech approval board as they are found.]

Basic Image: link

Name: Weapon Targeting System
Class: Weapon Skill
Type: Supplementary/ Offensive/ Defensive
Tier: Passive
Range: 200m
Description: Advanced sensors, radar and cameras are all used by Lani so as to get an accurate view of the battle at hand. Providing weaker armor locations on the heads up display [full 360 degree view], round trajectory as effected by the environment and possible target actions based on the fighting style of the target. The range of this program goes out to 200 meters but when used in a 'full scanning mode' so as to get the view of the whole field it drops to 100 meters. The sensors on this include, radar, sonar, infrared, microscopic and telescopic vision along with the benefits carried by having an AI in your system including enhanced aim from a computerized system and precision accuracy on target locations. The primary camera for this sensor is in the eyes of the suit but there are additional cameras mounted in the palms, and one on the shoulder mounted to see behind while in forward flight.

Name: Battle Fluidity Analysis
Class: Hand to Hand
Type: Supplementary/ Offensive/ Defensive
Tier: Passive
Range: 200m
Description: Several sensors mounted both internally and externally monitor the vitals of the user with details normally only possible with full grade hospitals. This also monitors any enemies in combat recording any injuries to provide appropriate feedback on their own vitals and systematically provides tactical information on the fight. In addition to the monitoring this system also augments Gage's own fighting in slight adjustments to strikes, blocks and basic body motions so that he is able to perform actions that would normally have been impossible through either increased response time or simply placing the right amount of force in the right place.

Name: Evasion Assist Jets
Class: Stepping
Type: Defensive/Offensive
Tier: III-VII
Range: Self
Description: By applying short bursts of precise jet like propulsion the wearer is able to maneuver about with the agility of someone mid step. By combining this jet like propulsion with an actual 'step' they are able to achieve speeds that are normally impossible without an external energy source. The Higher the Tier the faster the maximum flight speeds/ stepping speeds are possible. These maneuvering jets are placed all over the frame, mounted so that the wearer is able to use his enhanced step in all directions, however to get the highest levels of speed [Tier VI/VII] the user must step in the forward direction other wise they are stuck at Tiers V and less until they attempt to step forward. With Tier III the user is able to perform basic forward flight but not capable of exceeding supersonic speeds.

Name: Hydrolic Servo Prosthesis
Class: Hand to Hand
Type: Supplementary/Offensive
Tier:III-VII
Range: Self
Description: Through the use of several hydrolic pistons this suit grants the wearer the ability to lift massive amounts of weight, upwards of 75 tons in short bursts. This also allows the user to punch with the force of a train or rend metal apart with the users own hands. This can be scaled from Tier III all the way up to Tier VII where the max of 24 tons is reached. At Tier III the user is able to lift nearly two tons with little effort while at Tier IV the user is able to lift nearly 4. At Tier V 8 tons and at Tier VI 12 tons. For each of these the increased power output places the item into a cool-down standard for high tier techniques as per the guide.

-4 - Complete loss of functionality with 0% mobility as parts are locking up. [no energy left]
-3 - Loss of internal HUD/70% of mobility in the form of damaged parts [Emergency power used] -3adv
-2 - System has 20% armor protection/50% mobility from damaged parts [10% power level] -2adv
-1 - System has 50% armor coverage and has 75% mobility.
-0 - Armor damaged badly [70% plate coverage] but still in functioning order. 30% power
+1 - Armor plating ripped off on 15% of body
+2 - Armor Dented with energy levels at 40% power
+3 - Armor severe scratching/wear and energy at 60%
+4 - Paint Chipping and energy at 75%
+5 - Energy depleted to 80% [in effort to maintain speed and defense]
+6 - Energy depleted to 95% [in effort to maintain speed and defense]
+7 - Perfect working condition [System at full Charge]